Petroleum Coke
Size
According to your requirements
Package
25 kg small bags into ton bags or ton bags
Features
Low ash content and low boiler ash discharge, etc.
Application
Depending on its quality, petroleum coke can be used in industries such as graphite, smelting and chemical industry, etc
Petroleum coke, as a byproduct of petroleum, is produced in the process of petroleum processing, that is, the crude oil is distilled to separate light and heavy oil, and the heavy oil is converted into petroleum coke by hot cracking. If petroleum coke can be obtained directly from petroleum processing, then the petroleum coke is raw coke or ordinary coke. Petroleum coke has irregular shape, dark gray or black, porous structure and metallic luster.
Request a quote
A Graphitized petroleum coke is to place petroleum coke in a graphitization furnace. After a high temperature of about 3000 degrees, the amorphous carbon crystals of the petroleum coke are transformed into hexagonal layered crystal carbon, that is, the petroleum coke becomes graphite. This process is called graphitization, and the petroleum coke processed through the graphitization process is called graphitized petroleum coke, commonly known as “graphitized coke”.
Petroleum coke can be better decomposed in molten iron. All the mainstream recarburizers currently on the market are graphitized petroleum coke recarburizers. At present, most of the recarburizers are suitable for electric furnace smelting, and a small part of the recarburizers with a particularly fast absorption rate is used in cupolas. In the feeding method of electric furnace smelting, the recarburizer should be put in with the scrap steel and another charge, and small doses can be added to the surface of the molten iron. However, it is necessary to avoid large batches of materials in the molten iron to prevent excessive oxidation and the occurrence of insignificant decarburization effects and insufficient carbon content of the castings. The amount of recarburizer added is determined according to the ratio of other raw materials and the carbon content. The characteristic of the recarburizer itself is to select pure carbon-containing graphitized substances to reduce excessive impurities in the pig iron. The appropriate selection of the recarburizer can reduce the production cost of castings.
Graphitization can reduce the content of impurities in the recarburizer, increase the carbon content of the recarburizer, and reduce the sulfur content. The recarburizer is used in casting, which can greatly increase the amount of scrap steel, reduce the amount of pig iron or eliminate the need for pig iron.
The price of graphite fossil tar in Inner Mongolia and the emergence of graphitized petroleum coke have happened in recent years. Although it is not a new product, it belongs to one of the existing graphite materials. Because of its simple survival method and low survival cost, it Appeared to expand new uses. First of all, graphitized petroleum coke is a recarburizer for smelting. In the steelmaking industry, to produce good steel, there must be good raw materials, including a good recarburizer, and graphitized petroleum coke is a recarburizer.
There is no evidence to infer that the materials used for graphitized power plant gas chromatographs are also very important. The materials used for this equipment should be determined according to the on-site environment, and the air power generation environment should be set up as required to obtain the corresponding quantum measurement data. Material: The power battery is the basic raw material of the equipment, which is very important because it affects its lifespan, replacement cost, and processing accuracy.
Old factories for refining coarse coal will cause coal coking. Can I find coal tar from the old factory? Further pondering: coal tar for refining coarse coal may be used most. There is indeed such a thing. The refineries that used fine carbon coal tar as raw materials could not use this kind of coal, and the utilization capacity of coal tar is quite large, so we can further ponder: Is coal tar poisonous? Eat it all alone. The higher the price, the more expensive coal tar is. Only a lot of people have thought about this problem, but there is no problem with one-to-one door-to-door service unless there are special needs.
In fact, the constant temperature measurement cannot be completely measured by the constant temperature tool. If necessary, the constant temperature tool needs a computer program to calculate the above events according to accuracy. When doing the low-temperature measurements, you need to be careful not to touch the wires and joints, especially the gaps.
Because oil coke powder does not use waste petroleum slag as fuel. If the coke ash is replaced for this purpose, it will become nothing. For each process of coal coking, this coal coking is the remaining coal cooking fuel. It has a simple structure and a small area, which can open up the market. Because the coal coking blast furnace is similar to the supply line for coal production, it is suitable for long-distance and low-cost transportation of excellent raw materials. In terms of space, it is basically negligible. Like the traditional coking form of cogeneration, the technical requirements for coke are much higher.
- Company profile of the coke plant
(1) Place of establishment The coke plant is an enterprise mainly engaged in steel production and supplemented by other businesses. It has been responsible for steel production for many years. The main products are coke, coke powder, caramel, caramel wafers, caramel protein, and other products.
The polymer used in the high-quality epoxy resin can protect the environment from corrosion, as can be seen in the protection meridian. In the production of polymers, rust inhibitors and lubricants are usually added to protect and improve corrosion and chemical resistance, which has a very beneficial effect.
